Call Today

 

We have stumbled upon this article about How to Troubleshoot and Repair an Electric Water Heater down the page on the net and reckoned it made sense to write about it with you on this site.

Many modern residences utilize an electrical hot water heater for their heating system, because of its convenience and also convenience of use. Nevertheless, just like any other electric appliances, issues may occur with its usage, unexpectedly. It can be really frustrating to wake up to a cool shower rather than a hot one or having your bath with water that isn't warm adequate or perhaps also warm. Whatever the instance may be, water heater troubles can be rather nerve-racking. Thankfully, we've made a checklist of possible solutions to your hot water heater problems. There are a number of factors that can create most of these troubles, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you switch off the main power supply for safety. Whatever the problem is, getting it fixed need to not position excessive of a problem if you follow these actions:

 

Examine Your Power Supply:

As basic as this may appear, it is very necessary. Without appropriate power, your water heater will certainly not operate. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power problem. Check if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the issue, just transform it off and on again. Change any kind of damaged or damaged fuse. Check the home appliance with power after these modifications to see if it's currently working.

 

Inspect the Heating Element in the Hot Water Heater:

If it's not a power issue, then try having a look at your heating element if it is still working. Test each of your burner to make sure the problem isn't with any of them. If any one of them is malfunctioning, replace that component and then inspect whether the hot water is back on.

 

Check Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't hot enough, you may require to examine the temperature setups on your upper thermostat. Make certain the circuit breaker is turned off before doing anything. Open up the access panel and press the red switch for temperature reset over the thermostat. This should assist heat the water. Transform the breaker back on and check if the issue has actually been solved.

 

Call A Professional:

If after replacing all malfunctioning components and also resetting your temperature, the water heater still isn't working, you may require to speak to an expert plumber for an expert viewpoint. The trouble with your heater could be that the cold and hot faucets have been switched or it may be undersized for the amount of hot water needed in your home. Whatever the situation may be, an expert plumber would assist fix the issue.

 

Verdict

Hot water heater troubles are not constantly significant. A lot of them are due to minor issues like a blown fuse or worn-out heating element. Replacing the defective components need to suffice. Nonetheless, if you are still incapable to solve the problem, give a call to your nearby plumber ahead to get it fixed.

 

8 possible reasons why you have no Hot Water

 

Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.

 

Water Leak

 

Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.

Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.

 

Gas Heater: Gas Leak

 

If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.

 

Gas Heater: Pilot Light Problems

 

There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.

Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.

 

Gas Heater: Faulty Thermocouple

 

The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.

 

Electric Heater: Breaker Blues

 

Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.

 

Electric Heater: Reaching The Limit

 

If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.

 

Electric Heater: Heating Element

 

If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/

 

Hopefully you liked our piece on How to Troubleshoot and Repair an Electric Water Heater. Thanks so much for finding the time to read our piece. Those who enjoyed reading our post please make sure you remember to share it. Thanks a bunch for your time. Please stop by our blog back soon.

Urgent support required?